Theory of Structures Mcqs
Theory of Structures Mcqs, this topic has 163 mcqs, It takes five to ten minutes to complete this free Theory of Structures Mcqs test. You will see 4 or 5 option of each question. You must choose / think only one option and then press on answer key for check right answer. Practice "Theory of Structures Mcqs" MCQs and share with your friends, brothers, sisters.
Theory of Structures Mcqs (Total Quiz: 163)
MCQ: The force in CD of the truss shown in given figure, is________________?
- 3t compression
- 3t tension
- Zero
- 1.5t compression
C
MCQ: The ratio of the area of cross-section of a circular section to the area of its core, is_______________?
- 4
- 8
- 12
- 16
D
MCQ: In the truss shown in the given figure, the force in member BC is______________?
- 100 t compressive
- 100 t tensile
- Zero
- Indeterminate
C
MCQ: In plastic analysis, the shape factor for rectangular section, is________________?
- 1.4
- 1.5
- 1.6
- 1.7
B
MCQ: A masonry dam (density = 20,000 N/m3) 6 m high, one metre wide at the top and 4 m wide at the base, has vertical water face. The minimum stress at the base of the dam when the reservoir is full, will be_______________________?
- 75 N/m2
- 750 N/m 2
- 7500 N/m 2
- 75000 N/m2
C
MCQ: A shaft rotating N.R.M. under a torque T, transmits a power_______________?
- /30 Newton metres/sec
- /30 Newton metres/min
- /60 Newton metres/min
- /60 Newton metres/sec
A
MCQ: The maximum deflection due to a load W at the free end of a cantilever of length L and having flexural rigidity EI, is_____________?
- WL²/2EI
- WL²/3EI
- WL3/2EI
- WL3/3EI
D
MCQ: The ratio of the length and depth of a simply supported rectangular beam which experiences maximum bending stress equal to tensile stress, due to same load at its mid span, is_______________?
- 1/2
- 2/3
- 1/4
- 1/3
B
MCQ: The force in EC of the truss shown in the given figure, is__________________?
- Zero
- 5t tension
- 5t compression
- 4t tension
C
MCQ: If and are external and internal diameters of a circular shaft respectively, its polar moment of inertia, is________________?
- D4 – d4)
- D4 – d4)
- D4 – d4)
- D4 – d4)
D