Theory of Structures Mcqs
Theory of Structures Mcqs, this topic has 163 mcqs, It takes five to ten minutes to complete this free Theory of Structures Mcqs test. You will see 4 or 5 option of each question. You must choose / think only one option and then press on answer key for check right answer. Practice "Theory of Structures Mcqs" MCQs and share with your friends, brothers, sisters.
Theory of Structures Mcqs (Total Quiz: 163)
MCQ: The force in BC of the truss shown in the given figure, is___________________?
- 3.0 t compression
- 3.0 t tension
- t tension
- t compression
C
MCQ: A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be________________?
- 2/3
- 3/2
- 5/8
- 8/5
D
MCQ: In case of a simply supported I-section beam of span L and loaded with a central load W, the length of elasto-plastic zone of the plastic hinge, is_________________?
- L/2
- L/3
- L/4
- L/5
D
MCQ: If Ix and Iy are the moments of inertia of a section about X and Y axes, the polar moment of inertia of the section, is_________________?
- (IX + IY)/2
- (IX – IY)/2
- IX + IY
- (I /I )
C
MCQ: If E, N, K and 1/m are modulus of elasticity, modulus of rigidity. Bulk modulus and Poisson ratio of the material, the following relationship holds good_______________?
- E = 3K (1 – 2/m)
- E = 2N (1 + 1/m)
- (3/2)K (1 – 2/m) = N (1 + 1/m)
- All the above
D
MCQ: Gradually applied static loads do not change with time their_______________?
- Magnitude
- Direction
- Point of application
- All the above
D
MCQ: A body is said to be in equilibrium if___________________?
- It moves horizontally
- It moves vertically
- It rotates about its C.G.
- None of these
D
MCQ: The forces acting normally on the cross section of a bar shown in the given figure introduce_____________?
- Compressive stress
- Tensile stress
- Shear stress
- None of these
B
MCQ: The load on a spring per unit deflection, is called______________?
- Stiffness
- Proof resilience
- Proof stress
- Proof load
A