Theory of Structures Mcqs
Theory of Structures Mcqs, this topic has 163 mcqs, It takes five to ten minutes to complete this free Theory of Structures Mcqs test. You will see 4 or 5 option of each question. You must choose / think only one option and then press on answer key for check right answer. Practice "Theory of Structures Mcqs" MCQs and share with your friends, brothers, sisters.
Theory of Structures Mcqs (Total Quiz: 163)
MCQ: The forces in the members of simple trusses, may be analysed by________________?
- Graphical method
- Method of joints
- Method of sections
- All the above
D
MCQ: P = / L² is the equation for Euler’s crippling load if_________________?
- Both the ends are fixed
- Both the ends are hinged
- One end is fixed and other end is free
- One end is fixed and other end is hinged
B
MCQ: If a three hinged parabolic arch, (span l, rise h) is carrying a uniformly distributed load w/unit length over the entire span__________________?
- Horizontal thrust is wl2/8h
- S.F. will be zero throughout
- B.M. will be zero throughout
- All the above
D
MCQ: The ratio of the stresses produced by a suddenly applied load and by a gradually applied load on a bar, is__________________?
- 1/4
- 1/2
- 1
- 2
D
MCQ: Slenderness ratio of a long column, is_________________?
- Area of cross-section divided by radius of gyration
- Area of cross-section divided by least radius of gyration
- Radius of gyration divided by area of cross-section
- Length of column divided by least radius of gyration
D
MCQ: The horizontal thrust on the ends of a two hinged semicircular arch of radius carrying_________________?
- A uniforml 4/3
- end, is
- All the above
- non of these
C
MCQ: A shaft subjected to a bending moment M and a torque T, experiences__________________?
- Maximum bending stress = 32M d3
- Maximum shear stress = 16 T d3
- Both A. and B.
- Neither A. nor B.
C
MCQ: For calculating the allowable stress of long columns known as_________________?
- Straight line formula
- Parabolic formula
- Perry’s formula
- Rankine’s formula
B
MCQ: P=4²EI/L² is the equation of Euler’s crippling load if________________?
- Both the ends are fixed
- Both the ends are hinged
- One end is fixed and other end is free
- One end is fixed and other end is hinged
A
MCQ: Pick up the correct statement from the following_______________?
- The structural member subjected to compression and whose dimensions are small as
- compared to its length, is called a stmt
- The vertical compression members are generally known as columns or stanchions
- Deflection in lateral direction of a long column, is generally known as buckling
- All the above
E